Home About Us Contact Us Hallweld
Bollards at St Andrews Hospital, Adelaide Protection on the Ground
divider
Tank Access Cage Ladder Vertical Access
divider
Walkway on Asbestos Roof Horizontal Access
divider
Handrails at Happy Valley Tank Farm, South Australia Protection at Heights
divider
Scissor Lift being used to install Sunscreen Louvres Installation Services
divider
Projects
divider
Protection at Heights
Products > Titan Rescue Pole
Don't put yourself at risk trying to help a colleague without the right equipment. 

The Titan Rescue Pole will enable you to attach to someone who is suspended by a fall-arrest system and then raise or lower them to a point of safety.  The system has been designed to enable a rescue to take place without putting further staff in danger by descending to a fallen colleague.

The following simple steps enable a rescue to be carried out.
  1. Remove the Rescue Pole from its storage tube and release the velco straps
  2. Insert the Karabiner into the extension pole and clip
  3. Attach the Karabiner at the other end to an anchorage point, using the yellow sling as required
  4. Extend the pole and pulleys
  5. Reach down and slip the Karabiner through the harness D-ring and pull to release from the pole
  6. Pull on the free end of the pulley system to raise the person or, if the person is to be lowered,  let the pulley system down
  7. Pack the system away in readiness for next time
Attachments:


PDF: Titan Rescue Pole Brochure >
Titan Rescue Pole Pack
Titan Rescue Pole Components
Anti-Locking Karabiner
Lower Safely using Titan Rescue Pole
  hbBottom © Hallweld Bennett Pty Ltd 2009
All Rights Reserved
Created by FNUKY